OpenSearch

Send logs to Amazon OpenSearch Service

The opensearch output plugin, allows to ingest your records into an OpenSearch database. The following instructions assumes that you have a fully operational OpenSearch service running in your environment.

Configuration Parameters

Key Description default

Key	Description	default
Host	IP address or hostname of the target OpenSearch instance	127.0.0.1
Port	TCP port of the target OpenSearch instance	9200
Path	OpenSearch accepts new data on HTTP query path "/_bulk". But it is also possible to serve OpenSearch behind a reverse proxy on a subpath. This option defines such path on the fluent-bit side. It simply adds a path prefix in the indexing HTTP POST URI.	Empty string
Buffer_Size	Specify the buffer size used to read the response from the OpenSearch HTTP service. This option is useful for debugging purposes where is required to read full responses, note that response size grows depending of the number of records inserted. To set an unlimited amount of memory set this value to False, otherwise the value must be according to the Unit Size specification.	4KB
Pipeline	OpenSearch allows to setup filters called pipelines. This option allows to define which pipeline the database should use. For performance reasons is strongly suggested to do parsing and filtering on Fluent Bit side, avoid pipelines.
AWS_Auth	Enable AWS Sigv4 Authentication for Amazon OpenSearch Service	Off
AWS_Region	Specify the AWS region for Amazon OpenSearch Service
AWS_STS_Endpoint	Specify the custom sts endpoint to be used with STS API for Amazon OpenSearch Service
AWS_Role_ARN	AWS IAM Role to assume to put records to your Amazon cluster
AWS_External_ID	External ID for the AWS IAM Role specified with `aws_role_arn`
AWS_Service_Name	Service name to be used in AWS Sigv4 signature. For integration with Amazon OpenSearch Serverless, set to `aoss`. See the FAQ section on Amazon OpenSearch Serverless for more information.	es
AWS_Profile	AWS profile name	default
HTTP_User	Optional username credential for access
HTTP_Passwd	Password for user defined in HTTP_User
Index	Index name, supports Record Accessor syntax from 2.0.5 onwards.	fluent-bit
Type	Type name. This option is ignored if `Suppress_Type_Name` is enabled.	_doc
Logstash_Format	Enable Logstash format compatibility. This option takes a boolean value: True/False, On/Off	Off
Logstash_Prefix	When Logstash_Format is enabled, the Index name is composed using a prefix and the date, e.g: If Logstash_Prefix is equals to 'mydata' your index will become 'mydata-YYYY.MM.DD'. The last string appended belongs to the date when the data is being generated.	logstash
Logstash_Prefix_Key	When included: the value of the key in the record will be evaluated as key reference and overrides Logstash_Prefix for index generation. If the key/value is not found in the record then the Logstash_Prefix option will act as a fallback. The parameter is expected to be a record accessor.
Logstash_Prefix_Separator	Set a separator between logstash_prefix and date.	-
Logstash_DateFormat	Time format (based on strftime) to generate the second part of the Index name.	%Y.%m.%d
Time_Key	When Logstash_Format is enabled, each record will get a new timestamp field. The Time_Key property defines the name of that field.	@timestamp
Time_Key_Format	When Logstash_Format is enabled, this property defines the format of the timestamp.	%Y-%m-%dT%H:%M:%S
Time_Key_Nanos	When Logstash_Format is enabled, enabling this property sends nanosecond precision timestamps.	Off
Include_Tag_Key	When enabled, it append the Tag name to the record.	Off
Tag_Key	When Include_Tag_Key is enabled, this property defines the key name for the tag.	_flb-key
Generate_ID	When enabled, generate `_id` for outgoing records. This prevents duplicate records when retrying.	Off
Id_Key	If set, `_id` will be the value of the key from incoming record and `Generate_ID` option is ignored.
Write_Operation	Operation to use to write in bulk requests.	create
Replace_Dots	When enabled, replace field name dots with underscore.	Off
Trace_Output	When enabled print the OpenSearch API calls to stdout (for diag only)	Off
Trace_Error	When enabled print the OpenSearch API calls to stdout when OpenSearch returns an error (for diag only)	Off
Current_Time_Index	Use current time for index generation instead of message record	Off
Suppress_Type_Name	When enabled, mapping types is removed and `Type` option is ignored.	Off
Workers	The number of workers to perform flush operations for this output.	`0`
Compress	Set payload compression mechanism. The only available option is `gzip`. Default = "", which means no compression.

Host

IP address or hostname of the target OpenSearch instance

127.0.0.1

Port

TCP port of the target OpenSearch instance

9200

Path

OpenSearch accepts new data on HTTP query path "/_bulk". But it is also possible to serve OpenSearch behind a reverse proxy on a subpath. This option defines such path on the fluent-bit side. It simply adds a path prefix in the indexing HTTP POST URI.

Empty string

Buffer_Size

Specify the buffer size used to read the response from the OpenSearch HTTP service. This option is useful for debugging purposes where is required to read full responses, note that response size grows depending of the number of records inserted. To set an unlimited amount of memory set this value to False, otherwise the value must be according to the Unit Size specification.

4KB

Pipeline

OpenSearch allows to setup filters called pipelines. This option allows to define which pipeline the database should use. For performance reasons is strongly suggested to do parsing and filtering on Fluent Bit side, avoid pipelines.

AWS_Auth

Enable AWS Sigv4 Authentication for Amazon OpenSearch Service

Off

AWS_Region

Specify the AWS region for Amazon OpenSearch Service

AWS_STS_Endpoint

Specify the custom sts endpoint to be used with STS API for Amazon OpenSearch Service

AWS_Role_ARN

AWS IAM Role to assume to put records to your Amazon cluster

AWS_External_ID

External ID for the AWS IAM Role specified with aws_role_arn

AWS_Service_Name

Service name to be used in AWS Sigv4 signature. For integration with Amazon OpenSearch Serverless, set to aoss. See the FAQ section on Amazon OpenSearch Serverless for more information.

AWS_Profile

AWS profile name

default

HTTP_User

Optional username credential for access

HTTP_Passwd

Password for user defined in HTTP_User

Index

Index name, supports Record Accessor syntax from 2.0.5 onwards.

fluent-bit

Type

Type name. This option is ignored if Suppress_Type_Name is enabled.

_doc

Logstash_Format

Enable Logstash format compatibility. This option takes a boolean value: True/False, On/Off

Off

Logstash_Prefix

When Logstash_Format is enabled, the Index name is composed using a prefix and the date, e.g: If Logstash_Prefix is equals to 'mydata' your index will become 'mydata-YYYY.MM.DD'. The last string appended belongs to the date when the data is being generated.

logstash

Logstash_Prefix_Key

When included: the value of the key in the record will be evaluated as key reference and overrides Logstash_Prefix for index generation. If the key/value is not found in the record then the Logstash_Prefix option will act as a fallback. The parameter is expected to be a record accessor.

Logstash_Prefix_Separator

Set a separator between logstash_prefix and date.

Logstash_DateFormat

Time format (based on strftime) to generate the second part of the Index name.

%Y.%m.%d

Time_Key

When Logstash_Format is enabled, each record will get a new timestamp field. The Time_Key property defines the name of that field.

@timestamp

Time_Key_Format

When Logstash_Format is enabled, this property defines the format of the timestamp.

%Y-%m-%dT%H:%M:%S

Time_Key_Nanos

When Logstash_Format is enabled, enabling this property sends nanosecond precision timestamps.

Off

Include_Tag_Key

When enabled, it append the Tag name to the record.

Off

Tag_Key

When Include_Tag_Key is enabled, this property defines the key name for the tag.

_flb-key

Generate_ID

When enabled, generate _id for outgoing records. This prevents duplicate records when retrying.

Off

Id_Key

If set, _id will be the value of the key from incoming record and Generate_ID option is ignored.

Write_Operation

Operation to use to write in bulk requests.

create

Replace_Dots

When enabled, replace field name dots with underscore.

Off

Trace_Output

When enabled print the OpenSearch API calls to stdout (for diag only)

Off

Trace_Error

When enabled print the OpenSearch API calls to stdout when OpenSearch returns an error (for diag only)

Off

Current_Time_Index

Use current time for index generation instead of message record

Off

Suppress_Type_Name

When enabled, mapping types is removed and Type option is ignored.

Off

Workers

The number of workers to perform flush operations for this output.

0

Compress

Set payload compression mechanism. The only available option is gzip. Default = "", which means no compression.

The parameters index and type can be confusing if you are new to OpenSearch, if you have used a common relational database before, they can be compared to the database and table concepts. Also see the FAQ below

TLS / SSL

OpenSearch output plugin supports TLS/SSL, for more details about the properties available and general configuration, please refer to the TLS/SSL section.

write_operation

The write_operation can be any of:

Operation	Description
create (default)	adds new data - if the data already exists (based on its id), the op is skipped.
index	new data is added while existing data (based on its id) is replaced (reindexed).
update	updates existing data (based on its id). If no data is found, the op is skipped.
upsert	known as merge or insert if the data does not exist, updates if the data exists (based on its id).

Operation

Description

create (default)

adds new data - if the data already exists (based on its id), the op is skipped.

index

new data is added while existing data (based on its id) is replaced (reindexed).

update

updates existing data (based on its id). If no data is found, the op is skipped.

upsert

known as merge or insert if the data does not exist, updates if the data exists (based on its id).

Please note, Id_Key or Generate_ID is required in update, and upsert scenario.

Getting Started

In order to insert records into an OpenSearch service, you can run the plugin from the command line or through the configuration file:

Command Line

The opensearch plugin, can read the parameters from the command line in two ways, through the -p argument (property) or setting them directly through the service URI. The URI format is the following:

es://host:port/index/type

Using the format specified, you could start Fluent Bit through:

$ fluent-bit -i cpu -t cpu -o es://192.168.2.3:9200/my_index/my_type \
    -o stdout -m '*'

which is similar to do:

$ fluent-bit -i cpu -t cpu -o opensearch -p Host=192.168.2.3 -p Port=9200 \
    -p Index=my_index -p Type=my_type -o stdout -m '*'

Configuration File

In your main configuration file append the following Input & Output sections. You can visualize this configuration here

[INPUT]
    Name  cpu
    Tag   cpu

[OUTPUT]
    Name  opensearch
    Match *
    Host  192.168.2.3
    Port  9200
    Index my_index
    Type  my_type

About OpenSearch field names

Some input plugins may generate messages where the field names contains dots. This opensearch plugin replaces them with an underscore, e.g:

{"cpu0.p_cpu"=>17.000000}

becomes

{"cpu0_p_cpu"=>17.000000}

FAQ

Logstash_Prefix_Key

The following snippet demonstrates using the namespace name as extracted by the kubernetes filter as logstash preifix:

[OUTPUT]
    Name opensearch
    Match *
    # ...
    Logstash_Prefix logstash
    Logstash_Prefix_Key $kubernetes['namespace_name']
    # ...

For records that do nor have the field kubernetes.namespace_name, the default prefix, logstash will be used.

Fluent Bit + Amazon OpenSearch Service

The Amazon OpenSearch Service adds an extra security layer where HTTP requests must be signed with AWS Sigv4. This plugin supports Amazon OpenSearch Service with IAM Authentication.

See here for details on how AWS credentials are fetched.

Example configuration:

[OUTPUT]
    Name  opensearch
    Match *
    Host  vpc-test-domain-ke7thhzoo7jawsrhmm6mb7ite7y.us-west-2.es.amazonaws.com
    Port  443
    Index my_index
    Type  my_type
    AWS_Auth On
    AWS_Region us-west-2
    tls     On

Notice that the Port is set to 443, tls is enabled, and AWS_Region is set.

Action/metadata contains an unknown parameter type

Similarly to Elastic Cloud, OpenSearch in version 2.0 and above needs to have type option being removed by setting Suppress_Type_Name On.

Without this you will see errors like:

{"error":{"root_cause":[{"type":"illegal_argument_exception","reason":"Action/metadata line [1] contains an unknown parameter [_type]"}],"type":"illegal_argument_exception","reason":"Action/metadata line [1] contains an unknown parameter [_type]"},"status":400}

Fluent-Bit + Amazon OpenSearch Serverless

Amazon OpenSearch Serverless is an offering that eliminates your need to manage OpenSearch clusters. All existing Fluent Bit OpenSearch output plugin options work with OpenSearch Serverless. For Fluent Bit, the only difference is that you must specify the service name as aoss (Amazon OpenSearch Serverless) when you enable AWS_Auth:

AWS_Auth On
AWS_Region <aws-region>
AWS_Service_Name aoss

Data Access Permissions

When sending logs to OpenSearch Serverless, your AWS IAM entity needs OpenSearch Serverless Data Access permisions. Give your IAM entity the following data access permissions to your serverless collection:

aoss:CreateIndex
aoss:UpdateIndex
aoss:WriteDocument

With data access permissions, IAM policies are not needed to access the collection.

Issues with the OpenSearch cluster

Occasionally the Fluent Bit service may generate errors without any additional detail in the logs to explain the source of the issue, even with the service's log_level attribute set to Debug.

For example, in this scenario the logs show that a connection was successfully established with the OpenSearch domain, and yet an error is still returned:

[2023/07/10 19:26:00] [debug] [http_client] not using http_proxy for header
[2023/07/10 19:26:00] [debug] [output:opensearch:opensearch.5] Signing request with AWS Sigv4
[2023/07/10 19:26:00] [debug] [aws_credentials] Requesting credentials from the EC2 provider..
[2023/07/10 19:26:00] [debug] [output:opensearch:opensearch.5] HTTP Status=200 URI=/_bulk
[2023/07/10 19:26:00] [debug] [upstream] KA connection #137 to [MY_OPENSEARCH_DOMAIN]:443 is now available
[2023/07/10 19:26:00] [debug] [out flush] cb_destroy coro_id=1746
[2023/07/10 19:26:00] [debug] [task] task_id=2 reached retry-attempts limit 5/5
[2023/07/10 19:26:00] [error] [engine] chunk '7578-1689017013.184552017.flb' cannot be retried: task_id=2, input=tail.6 > output=opensearch.5
[2023/07/10 19:26:00] [debug] [task] destroy task=0x7fd1cc4d5ad0 (task_id=2)

This behavior could be indicative of a hard-to-detect issue with index shard usage in the OpenSearch domain.

While OpenSearch index shards and disk space are related, they are not directly tied to one another.

OpenSearch domains are limited to 1000 index shards per data node, regardless of the size of the nodes. And, importantly, shard usage is not proportional to disk usage: an individual index shard can hold anywhere from a few kilobytes to dozens of gigabytes of data.

In other words, depending on the way index creation and shard allocation are configured in the OpenSearch domain, all of the available index shards could be used long before the data nodes run out of disk space and begin exhibiting disk-related performance issues (e.g. nodes crashing, data corruption, or the dashboard going offline).

The primary issue that arises when a domain is out of available index shards is that new indexes can no longer be created (though logs can still be added to existing indexes).

When that happens, the Fluent Bit OpenSearch output may begin showing confusing behavior. For example:

Errors suddenly appear (outputs were previously working and there were no changes to the Fluent Bit configuration when the errors began)
Errors are not consistently occurring (some logs are still reaching the OpenSearch domain)
The Fluent Bit service logs show errors, but without any detail as to the root cause

If any of those symptoms are present, consider using the OpenSearch domain's API endpoints to troubleshoot possible shard issues.

Running this command will show both the shard count and disk usage on all of the nodes in the domain.

GET _cat/allocation?v

Index creation issues will begin to appear if any hot data nodes have around 1000 shards OR if the total number of shards spread across hot and ultrawarm data nodes in the cluster is greater than 1000 times the total number of nodes (e.g., in a cluster with 6 nodes, the maximum shard count would be 6000).

Alternatively, running this command to manually create a new index will return an explicit error related to shard count if the maximum has been exceeded.

PUT <index-name>

There are multiple ways to resolve excessive shard usage in an OpenSearch domain such as deleting or combining indexes, adding more data nodes to the cluster, or updating the domain's index creation and sharding strategy. Consult the OpenSearch documentation for more information on how to use these strategies.

Last updated 2 months ago