Fluent Bit might optionally use a configuration file to define how the service will behave.

Before proceeding we need to understand how the configuration schema works.

The schema is defined by three concepts:

• Sections

• Entries: Key/Value

• Indented Configuration Mode

A simple example of a configuration file is as follows:

[SERVICE]
    # This is a commented line
    Daemon    off
    log_level debug

Sections

A section is defined by a name or title inside brackets. Looking at the example above, a Service section has been set using [SERVICE] definition. Section rules:

• All section content must be indented (4 spaces ideally).

• Multiple sections can exist on the same file.

• A section is expected to have comments and entries, it cannot be empty.

• Any commented line under a section, must be indented too.

• End-of-line comments are not supported, only full-line comments.

Entries: Key/Value

A section may contain Entries, an entry is defined by a line of text that contains a Key and a Value, using the above example, the [SERVICE] section contains two entries, one is the key Daemon with value off and the other is the key Log_Level with the value debug. Entries rules:

• An entry is defined by a key and a value.

• A key must be indented.

• A key must contain a value which ends in the breakline.

• Multiple keys with the same name can exist.

Also commented lines are set prefixing the # character, those lines are not processed but they must be indented too.

Indented Configuration Mode

Fluent Bit configuration files are based in a strict Indented Mode, that means that each configuration file must follow the same pattern of alignment from left to right when writing text. By default an indentation level of four spaces from left to right is suggested. Example:

[FIRST_SECTION]
    # This is a commented line
    Key1  some value
    Key2  another value
    # more comments

[SECOND_SECTION]
    KeyN  3.14

As you can see there are two sections with multiple entries and comments, note also that empty lines are allowed and they do not need to be indented.

Fluent Bit works internally with structured records and it can be composed of an unlimited number of keys and values. Values can be anything like a number, string, array, or a map.

Having a way to select a specific part of the record is critical for certain core functionalities or plugins, this feature is called Record Accessor.

consider Record Accessor a simple grammar to specify record content and other miscellaneous values.

Format

A record accessor rule starts with the character $. Using the structured content above as an example the following table describes how to access a record:

{
  "log": "some message",
  "stream": "stdout",
  "labels": {
     "color": "blue", 
     "unset": null,
     "project": {
         "env": "production"
      }
  }
}

The following table describe some accessing rules and the expected returned value:

If the accessor key does not exist in the record like the last example $labels['undefined'] , the operation is simply omitted, no exception will occur.

Usage Example

The feature is enabled on a per plugin basis, not all plugins enable this feature. As an example consider a configuration that aims to filter records using grep that only matches where labels have a color blue:

[SERVICE]
    flush        1
    log_level    info
    parsers_file parsers.conf

[INPUT]
    name      tail
    path      test.log
    parser    json

[FILTER]
    name      grep
    match     *
    regex     $labels['color'] ^blue$

[OUTPUT]
    name      stdout
    match     *
    format    json_lines

The file content to process in test.log is the following:

{"log": "message 1", "labels": {"color": "blue"}}
{"log": "message 2", "labels": {"color": "red"}}
{"log": "message 3", "labels": {"color": "green"}}
{"log": "message 4", "labels": {"color": "blue"}}

Running Fluent Bit with the configuration above the output will be:

$ bin/fluent-bit -c fluent-bit.conf 
Fluent Bit v1.x.x
* Copyright (C) 2019-2020 The Fluent Bit Authors
* Copyright (C) 2015-2018 Treasure Data
* Fluent Bit is a CNCF sub-project under the umbrella of Fluentd
* https://fluentbit.io

[2020/09/11 16:11:07] [ info] [engine] started (pid=1094177)
[2020/09/11 16:11:07] [ info] [storage] version=1.0.5, initializing...
[2020/09/11 16:11:07] [ info] [storage] in-memory
[2020/09/11 16:11:07] [ info] [storage] normal synchronization mode, checksum disabled, max_chunks_up=128
[2020/09/11 16:11:07] [ info] [sp] stream processor started
[2020/09/11 16:11:07] [ info] inotify_fs_add(): inode=55716713 watch_fd=1 name=test.log
{"date":1599862267.483684,"log":"message 1","labels":{"color":"blue"}}
{"date":1599862267.483692,"log":"message 4","labels":{"color":"blue"}}

Limitations of record_accessor templating

The Fluent Bit record_accessor library has a limitation in the characters that can separate template variables- only dots and commas (. and ,) can come after a template variable. This is because the templating library must parse the template and determine the end of a variable.

The following would be invalid templates because the two template variables are not separated by commas or dots:

• $TaskID-$ECSContainerName

• $TaskID/$ECSContainerName

• $TaskID_$ECSContainerName

• $TaskIDfooo$ECSContainerName

However, the following are valid:

• $TaskID.$ECSContainerName

• $TaskID.ecs_resource.$ECSContainerName

• $TaskID.fooo.$ECSContainerName

And the following are valid since they only contain one template variable with nothing after it:

• fooo$TaskID

• fooo____$TaskID

• fooo/bar$TaskID

One of the ways to configure Fluent Bit is using a main configuration file. Fluent Bit allows the use one configuration file that works at a global scope and uses the defined Format and Schema.

The main configuration file supports four sections:

• Service

• Input

• Filter

• Output

It's also possible to split the main configuration file into multiple files using the Include File feature to include external files.

Service

The Service section defines global properties of the service. The following keys are:

The following is an example of a SERVICE section:

[SERVICE]
    Flush           5
    Daemon          off
    Log_Level       debug

For scheduler and retry details, see scheduling and retries.

Config input

The INPUT section defines a source (related to an input plugin). Each input plugin can add its own configuration keys:

Name is mandatory and tells Fluent Bit which input plugin to load. Tag is mandatory for all plugins except for the input forward plugin, which provides dynamic tags.

Example

The following is an example of an INPUT section:

[INPUT]
    Name cpu
    Tag  my_cpu

Config filter

The FILTER section defines a filter (related to an filter plugin). Each filter plugin can add it own configuration keys. The base configuration for each FILTER section contains:

Name is mandatory and lets Fluent Bit know which filter plugin should be loaded. Match or Match_Regex is mandatory for all plugins. If both are specified, Match_Regex takes precedence.

Filter example

The following is an example of a FILTER section:

[FILTER]
    Name  grep
    Match *
    Regex log aa

Config output

The OUTPUT section specifies a destination that certain records should go to after a Tag match. Fluent Bit can route up to 256 OUTPUT plugins. The configuration supports the following keys:

Output example

The following is an example of an OUTPUT section:

[OUTPUT]
    Name  stdout
    Match my*cpu

Example: collecting CPU metrics

The following configuration file example demonstrates how to collect CPU metrics and flush the results every five seconds to the standard output:

[SERVICE]
    Flush     5
    Daemon    off
    Log_Level debug

[INPUT]
    Name  cpu
    Tag   my_cpu

[OUTPUT]
    Name  stdout
    Match my*cpu

Config Include File

To avoid complicated long configuration files is better to split specific parts in different files and call them (include) from one main file. The @INCLUDE can be used in the following way:

@INCLUDE somefile.conf

The configuration reader will try to open the path somefile.conf. If not found, the reader assumes the file is on a relative path based on the path of the base configuration file:

• Main configuration path: /tmp/main.conf

• Included file: somefile.conf

• Fluent Bit will try to open somefile.conf, if it fails it will try /tmp/somefile.conf.

The @INCLUDE command only works at top-left level of the configuration line, and can't be used inside sections.

Wildcard character (*) supports including multiple files. For example:

@INCLUDE input_*.conf

Files matching the wildcard character are included unsorted. If plugin ordering between files needs to be preserved, the files should be included explicitly.

Fluent Bit supports the usage of environment variables in any value associated to a key when using a configuration file.

The variables are case sensitive and can be used in the following format:

${MY_VARIABLE}

When Fluent Bit starts, the configuration reader will detect any request for ${MY_VARIABLE} and will try to resolve its value.

When Fluent Bit is running under systemd (using the official packages), environment variables can be set in the following files:

• /etc/default/fluent-bit (Debian based system)

• /etc/sysconfig/fluent-bit (Others)

These files are ignored if they do not exist.

Example

Create the following configuration file (fluent-bit.conf):

[SERVICE]
    Flush        1
    Daemon       Off
    Log_Level    info

[INPUT]
    Name cpu
    Tag  cpu.local

[OUTPUT]
    Name  ${MY_OUTPUT}
    Match *

Open a terminal and set the environment variable:

$ export MY_OUTPUT=stdout

The above command set the 'stdout' value to the variable MY_OUTPUT.

Run Fluent Bit with the recently created configuration file:

$ bin/fluent-bit -c fluent-bit.conf
Fluent Bit v1.4.0
* Copyright (C) 2019-2020 The Fluent Bit Authors
* Copyright (C) 2015-2018 Treasure Data
* Fluent Bit is a CNCF sub-project under the umbrella of Fluentd
* https://fluentbit.io

[2020/03/03 12:25:25] [ info] [engine] started
[0] cpu.local: [1491243925, {"cpu_p"=>1.750000, "user_p"=>1.750000, "system_p"=>0.000000, "cpu0.p_cpu"=>3.000000, "cpu0.p_user"=>2.000000, "cpu0.p_system"=>1.000000, "cpu1.p_cpu"=>0.000000, "cpu1.p_user"=>0.000000, "cpu1.p_system"=>0.000000, "cpu2.p_cpu"=>4.000000, "cpu2.p_user"=>4.000000, "cpu2.p_system"=>0.000000, "cpu3.p_cpu"=>1.000000, "cpu3.p_user"=>1.000000, "cpu3.p_system"=>0.000000}]

As you can see the service worked properly as the configuration was valid.

It's common that Fluent Bit output plugins aims to connect to external services to deliver the logs over the network, this is the case of HTTP, Elasticsearch and Forward within others. Being able to connect to one node (host) is normal and enough for more of the use cases, but there are other scenarios where balancing across different nodes is required. The Upstream feature provides such capability.

An Upstream defines a set of nodes that will be targeted by an output plugin, by the nature of the implementation an output plugin must support the Upstream feature. The following plugin(s) have Upstream support:

• Forward

The current balancing mode implemented is round-robin.

Configuration

To define an Upstream it's required to create an specific configuration file that contains an UPSTREAM and one or multiple NODE sections. The following table describe the properties associated to each section. Note that all of them are mandatory:

Nodes and specific plugin configuration

A Node might contain additional configuration keys required by the plugin, on that way we provide enough flexibility for the output plugin, a common use case is Forward output where if TLS is enabled, it requires a shared key (more details in the example below).

Nodes and TLS (Transport Layer Security)

In addition to the properties defined in the table above, the network operations against a defined node can optionally be done through the use of TLS for further encryption and certificates use.

The TLS options available are described in the TLS/SSL section and can be added to the any Node section.

Configuration File Example

The following example defines an Upstream called forward-balancing which aims to be used by Forward output plugin, it register three Nodes:

• node-1: connects to 127.0.0.1:43000

• node-2: connects to 127.0.0.1:44000

• node-3: connects to 127.0.0.1:45000 using TLS without verification. It also defines a specific configuration option required by Forward output called shared_key.

[UPSTREAM]
    name       forward-balancing

[NODE]
    name       node-1
    host       127.0.0.1
    port       43000

[NODE]
    name       node-2
    host       127.0.0.1
    port       44000

[NODE]
    name       node-3
    host       127.0.0.1
    port       45000
    tls        on
    tls.verify off
    shared_key secret

Note that every Upstream definition must exists on it own configuration file in the file system. Adding multiple Upstreams in the same file or different files is not allowed.

Configuration files must be flexible enough for any deployment need, but they must keep a clean and readable format.

Fluent Bit Commands extends a configuration file with specific built-in features. The list of commands available as of Fluent Bit 0.12 series are:

@INCLUDE Command

Configuring a logging pipeline might lead to an extensive configuration file. In order to maintain a human-readable configuration, it's suggested to split the configuration in multiple files.

The @INCLUDE command allows the configuration reader to include an external configuration file, e.g:

[SERVICE]
    Flush 1

@INCLUDE inputs.conf
@INCLUDE outputs.conf

The above example defines the main service configuration file and also include two files to continue the configuration:

inputs.conf

[INPUT]
    Name cpu
    Tag  mycpu

[INPUT]
    Name tail
    Path /var/log/*.log
    Tag  varlog.*

outputs.conf

[OUTPUT]
    Name   stdout
    Match  mycpu

[OUTPUT]
    Name            es
    Match           varlog.*
    Host            127.0.0.1
    Port            9200
    Logstash_Format On

Note that despites the order of inclusion, Fluent Bit will ALWAYS respect the following order:

• Service

• Inputs

• Filters

• Outputs

@SET Command

Fluent Bit supports configuration variables, one way to expose this variables to Fluent Bit is through setting a Shell environment variable, the other is through the @SET command.

The @SET command can only be used at root level of each line, meaning it cannot be used inside a section, e.g:

@SET my_input=cpu
@SET my_output=stdout

[SERVICE]
    Flush 1

[INPUT]
    Name ${my_input}

[OUTPUT]
    Name ${my_output}