TCP & TLS

The tcp output plugin allows to send records to a remote TCP server. The payload can be formatted in different ways as required.

Configuration Parameters

Key	Description	default
Host	Target host where Fluent-Bit or Fluentd are listening for Forward messages.	127.0.0.1
Port	TCP Port of the target service.	5170
Format	Specify the data format to be printed. Supported formats are msgpack json, json_lines and json_stream.	msgpack
json_date_key	Specify the name of the date field in output	date
json_date_format	Specify the format of the date. Supported formats are double , iso8601 (eg: 2018-05-30T09:39:52.000681Z) and epoch.	double

TLS Configuration Parameters

The following parameters are available to configure a secure channel connection through TLS:

Key	Description	Default
tls	Enable or disable TLS support	Off
tls.verify	Force certificate validation	On
tls.debug	Set TLS debug verbosity level. It accept the following values: 0 (No debug), 1 (Error), 2 (State change), 3 (Informational) and 4 Verbose	1
tls.ca_file	Absolute path to CA certificate file
tls.crt_file	Absolute path to Certificate file.
tls.key_file	Absolute path to private Key file.
tls.key_passwd	Optional password for tls.key_file file.

Command Line

$ bin/fluent-bit -i cpu -o tcp://127.0.0.1:5170 -p format=json_lines -v

We have specified to gather CPU usage metrics and send them in JSON lines mode to a remote end-point using netcat service, e.g:

Start the TCP listener

Run the following in a separate terminal, netcat will start listening for messages on TCP port 5170

$ nc -l 5170

Start Fluent Bit

$ bin/fluent-bit -i cpu -o stdout -p format=msgpack -v
Fluent Bit v1.x.x
* Copyright (C) 2019-2020 The Fluent Bit Authors
* Copyright (C) 2015-2018 Treasure Data
* Fluent Bit is a CNCF sub-project under the umbrella of Fluentd
* https://fluentbit.io

[2016/10/07 21:52:01] [ info] [engine] started
[0] cpu.0: [1475898721, {"cpu_p"=>0.500000, "user_p"=>0.250000, "system_p"=>0.250000, "cpu0.p_cpu"=>0.000000, "cpu0.p_user"=>0.000000, "cpu0.p_system"=>0.000000, "cpu1.p_cpu"=>0.000000, "cpu1.p_user"=>0.000000, "cpu1.p_system"=>0.000000, "cpu2.p_cpu"=>0.000000, "cpu2.p_user"=>0.000000, "cpu2.p_system"=>0.000000, "cpu3.p_cpu"=>1.000000, "cpu3.p_user"=>0.000000, "cpu3.p_system"=>1.000000}]
[1] cpu.0: [1475898722, {"cpu_p"=>0.250000, "user_p"=>0.250000, "system_p"=>0.000000, "cpu0.p_cpu"=>0.000000, "cpu0.p_user"=>0.000000, "cpu0.p_system"=>0.000000, "cpu1.p_cpu"=>1.000000, "cpu1.p_user"=>1.000000, "cpu1.p_system"=>0.000000, "cpu2.p_cpu"=>0.000000, "cpu2.p_user"=>0.000000, "cpu2.p_system"=>0.000000, "cpu3.p_cpu"=>0.000000, "cpu3.p_user"=>0.000000, "cpu3.p_system"=>0.000000}]
[2] cpu.0: [1475898723, {"cpu_p"=>0.750000, "user_p"=>0.250000, "system_p"=>0.500000, "cpu0.p_cpu"=>2.000000, "cpu0.p_user"=>1.000000, "cpu0.p_system"=>1.000000, "cpu1.p_cpu"=>0.000000, "cpu1.p_user"=>0.000000, "cpu1.p_system"=>0.000000, "cpu2.p_cpu"=>1.000000, "cpu2.p_user"=>0.000000, "cpu2.p_system"=>1.000000, "cpu3.p_cpu"=>0.000000, "cpu3.p_user"=>0.000000, "cpu3.p_system"=>0.000000}]
[3] cpu.0: [1475898724, {"cpu_p"=>1.000000, "user_p"=>0.750000, "system_p"=>0.250000, "cpu0.p_cpu"=>1.000000, "cpu0.p_user"=>1.000000, "cpu0.p_system"=>0.000000, "cpu1.p_cpu"=>2.000000, "cpu1.p_user"=>1.000000, "cpu1.p_system"=>1.000000, "cpu2.p_cpu"=>1.000000, "cpu2.p_user"=>1.000000, "cpu2.p_system"=>0.000000, "cpu3.p_cpu"=>1.000000, "cpu3.p_user"=>1.000000, "cpu3.p_system"=>0.000000}]

No more, no less, it just works.