Forward

Forward is the protocol used by Fluentd to route messages between peers. The forward output plugin provides interoperability between Fluent Bit and Fluentd. There are no configuration steps required besides specifying where Fluentd is located, which can be a local or a remote destination.

This plugin offers two different transports and modes:

Forward (TCP): It uses a plain TCP connection.
Secure Forward (TLS): when TLS is enabled, the plugin switch to Secure Forward mode.

Configuration Parameters

The following parameters are mandatory for either Forward for Secure Forward modes:

Key

Description

Default

Host

Target host where Fluent-Bit or Fluentd are listening for Forward messages.

127.0.0.1

Port

TCP Port of the target service.

24224

Time_as_Integer

Set timestamps in integer format, it enable compatibility mode for Fluentd v0.12 series.

False

Upstream

If Forward will connect to an Upstream instead of a simple host, this property defines the absolute path for the Upstream configuration file, for more details about this refer to the Upstream Servers documentation section.

Unix_Path

Specify the path to unix socket to send a Forward message. If set, Upstream is ignored.

Tag

Overwrite the tag as we transmit. This allows the receiving pipeline start fresh, or to attribute source.

Send_options

Always send options (with "size"=count of messages)

False

Require_ack_response

Send "chunk"-option and wait for "ack" response from server. Enables at-least-once and receiving server can control rate of traffic. (Requires Fluentd v0.14.0+ server)

False

Compress

Set to "gzip" to enable gzip compression. Incompatible with Time_as_Integer=True and tags set dynamically using the Rewrite Tag filter. (Requires Fluentd v0.14.7+ server)

Workers

Enables dedicated thread(s) for this output. Default value is set since version 1.8.13. For previous versions is 0.

Secure Forward Mode Configuration Parameters

When using Secure Forward mode, the TLS mode requires to be enabled. The following additional configuration parameters are available:

Key

Description

Default

Shared_Key

A key string known by the remote Fluentd used for authorization.

Empty_Shared_Key

Use this option to connect to Fluentd with a zero-length secret.

False

Username

Specify the username to present to a Fluentd server that enables user_auth.

Password

Specify the password corresponding to the username.

Self_Hostname

Default value of the auto-generated certificate common name (CN).

localhost

tls

Enable or disable TLS support

Off

tls.verify

Force certificate validation

tls.debug

Set TLS debug verbosity level. It accept the following values: 0 (No debug), 1 (Error), 2 (State change), 3 (Informational) and 4 Verbose

tls.ca_file

Absolute path to CA certificate file

tls.crt_file

Absolute path to Certificate file.

tls.key_file

Absolute path to private Key file.

tls.key_passwd

Optional password for tls.key_file file.

Forward Setup

Before proceeding, make sure that Fluentd is installed, if it's not the case please refer to the following Fluentd Installation document and go ahead with that.

Once Fluentd is installed, create the following configuration file example that will allow us to stream data into it:

<source>
  type forward
  bind 0.0.0.0
  port 24224
</source>

<match fluent_bit>
  type stdout
</match>

That configuration file specifies that it will listen for TCP connections on the port 24224 through the forward input type. Then for every message with a fluent_bit TAG, will print the message to the standard output.

In one terminal launch Fluentd specifying the new configuration file created:

$ fluentd -c test.conf
2017-03-23 11:50:43 -0600 [info]: reading config file path="test.conf"
2017-03-23 11:50:43 -0600 [info]: starting fluentd-0.12.33
2017-03-23 11:50:43 -0600 [info]: gem 'fluent-mixin-config-placeholders' version '0.3.1'
2017-03-23 11:50:43 -0600 [info]: gem 'fluent-plugin-docker' version '0.1.0'
2017-03-23 11:50:43 -0600 [info]: gem 'fluent-plugin-elasticsearch' version '1.4.0'
2017-03-23 11:50:43 -0600 [info]: gem 'fluent-plugin-flatten-hash' version '0.2.0'
2017-03-23 11:50:43 -0600 [info]: gem 'fluent-plugin-flowcounter-simple' version '0.0.4'
2017-03-23 11:50:43 -0600 [info]: gem 'fluent-plugin-influxdb' version '0.2.8'
2017-03-23 11:50:43 -0600 [info]: gem 'fluent-plugin-json-in-json' version '0.1.4'
2017-03-23 11:50:43 -0600 [info]: gem 'fluent-plugin-mongo' version '0.7.10'
2017-03-23 11:50:43 -0600 [info]: gem 'fluent-plugin-out-http' version '0.1.3'
2017-03-23 11:50:43 -0600 [info]: gem 'fluent-plugin-parser' version '0.6.0'
2017-03-23 11:50:43 -0600 [info]: gem 'fluent-plugin-record-reformer' version '0.7.0'
2017-03-23 11:50:43 -0600 [info]: gem 'fluent-plugin-rewrite-tag-filter' version '1.5.1'
2017-03-23 11:50:43 -0600 [info]: gem 'fluent-plugin-stdin' version '0.1.1'
2017-03-23 11:50:43 -0600 [info]: gem 'fluent-plugin-td' version '0.10.27'
2017-03-23 11:50:43 -0600 [info]: adding match pattern="fluent_bit" type="stdout"
2017-03-23 11:50:43 -0600 [info]: adding source type="forward"
2017-03-23 11:50:43 -0600 [info]: using configuration file: <ROOT>
  <source>
    type forward
    bind 0.0.0.0
    port 24224
  </source>
  <match fluent_bit>
    type stdout
  </match>
</ROOT>
2017-03-23 11:50:43 -0600 [info]: listening fluent socket on 0.0.0.0:24224

Fluent Bit + Forward Setup

Now that Fluentd is ready to receive messages, we need to specify where the forward output plugin will flush the information using the following format:

bin/fluent-bit -i INPUT -o forward://HOST:PORT

If the TAG parameter is not set, the plugin will retain the tag. Keep in mind that TAG is important for routing rules inside Fluentd.

Using the CPU input plugin as an example we will flush CPU metrics to Fluentd with tag fluent_bit:

$ bin/fluent-bit -i cpu -t fluent_bit -o forward://127.0.0.1:24224

Now on the Fluentd side, you will see the CPU metrics gathered in the last seconds:

2017-03-23 11:53:06 -0600 fluent_bit: {"cpu_p":0.0,"user_p":0.0,"system_p":0.0,"cpu0.p_cpu":0.0,"cpu0.p_user":0.0,"cpu0.p_system":0.0,"cpu1.p_cpu":0.0,"cpu1.p_user":0.0,"cpu1.p_system":0.0,"cpu2.p_cpu":0.0,"cpu2.p_user":0.0,"cpu2.p_system":0.0,"cpu3.p_cpu":1.0,"cpu3.p_user":1.0,"cpu3.p_system":0.0}
2017-03-23 11:53:07 -0600 fluent_bit: {"cpu_p":2.25,"user_p":2.0,"system_p":0.25,"cpu0.p_cpu":3.0,"cpu0.p_user":3.0,"cpu0.p_system":0.0,"cpu1.p_cpu":1.0,"cpu1.p_user":1.0,"cpu1.p_system":0.0,"cpu2.p_cpu":1.0,"cpu2.p_user":1.0,"cpu2.p_system":0.0,"cpu3.p_cpu":3.0,"cpu3.p_user":2.0,"cpu3.p_system":1.0}
2017-03-23 11:53:08 -0600 fluent_bit: {"cpu_p":1.75,"user_p":1.0,"system_p":0.75,"cpu0.p_cpu":2.0,"cpu0.p_user":1.0,"cpu0.p_system":1.0,"cpu1.p_cpu":3.0,"cpu1.p_user":1.0,"cpu1.p_system":2.0,"cpu2.p_cpu":3.0,"cpu2.p_user":2.0,"cpu2.p_system":1.0,"cpu3.p_cpu":2.0,"cpu3.p_user":1.0,"cpu3.p_system":1.0}
2017-03-23 11:53:09 -0600 fluent_bit: {"cpu_p":4.75,"user_p":3.5,"system_p":1.25,"cpu0.p_cpu":4.0,"cpu0.p_user":3.0,"cpu0.p_system":1.0,"cpu1.p_cpu":5.0,"cpu1.p_user":4.0,"cpu1.p_system":1.0,"cpu2.p_cpu":3.0,"cpu2.p_user":2.0,"cpu2.p_system":1.0,"cpu3.p_cpu":5.0,"cpu3.p_user":4.0,"cpu3.p_system":1.0}

So we gathered CPU metrics and flushed them out to Fluentd properly.

Fluent Bit + Secure Forward Setup

DISCLAIMER: the following example does not consider the generation of certificates for best practice on production environments.

Secure Forward aims to provide a secure channel of communication with the remote Fluentd service using TLS.

Fluent Bit

Paste this content in a file called flb.conf:

[SERVICE]
    Flush      5
    Daemon     off
    Log_Level  info

[INPUT]
    Name       cpu
    Tag        cpu_usage

[OUTPUT]
    Name          forward
    Match         *
    Host          127.0.0.1
    Port          24284
    Shared_Key    secret
    Self_Hostname flb.local
    tls           on
    tls.verify    off

Fluentd

Paste this content in a file called fld.conf:

<source>
  @type         secure_forward
  self_hostname myserver.local
  shared_key    secret
  secure no
</source>

<match **>
 @type stdout
</match>

If you're using Fluentd v1, set up it as below:

<source>
  @type forward
  <transport tls>
    cert_path /etc/td-agent/certs/fluentd.crt
    private_key_path /etc/td-agent/certs/fluentd.key
    private_key_passphrase password
  </transport>
  <security>
    self_hostname myserver.local
    shared_key secret
  </security>
</source>

<match **>
 @type stdout
</match>

Test Communication

Start Fluentd:

$ fluentd -c fld.conf

Start Fluent Bit:

$ fluent-bit -c flb.conf

After five seconds, Fluent Bit will write records to Fluentd. In Fluentd output you will see a message like this:

2017-03-23 13:34:40 -0600 [info]: using configuration file: <ROOT>
  <source>
    @type secure_forward
    self_hostname myserver.local
    shared_key xxxxxx
    secure no
  </source>
  <match **>
    @type stdout
  </match>
</ROOT>
2017-03-23 13:34:41 -0600 cpu_usage: {"cpu_p":1.0,"user_p":0.75,"system_p":0.25,"cpu0.p_cpu":1.0,"cpu0.p_user":1.0,"cpu0.p_system":0.0,"cpu1.p_cpu":2.0,"cpu1.p_user":1.0,"cpu1.p_system":1.0,"cpu2.p_cpu":1.0,"cpu2.p_user":1.0,"cpu2.p_system":0.0,"cpu3.p_cpu":2.0,"cpu3.p_user":1.0,"cpu3.p_system":1.0}
2017-03-23 13:34:42 -0600 cpu_usage: {"cpu_p":1.75,"user_p":1.75,"system_p":0.0,"cpu0.p_cpu":3.0,"cpu0.p_user":3.0,"cpu0.p_system":0.0,"cpu1.p_cpu":2.0,"cpu1.p_user":2.0,"cpu1.p_system":0.0,"cpu2.p_cpu":0.0,"cpu2.p_user":0.0,"cpu2.p_system":0.0,"cpu3.p_cpu":1.0,"cpu3.p_user":1.0,"cpu3.p_system":0.0}
2017-03-23 13:34:43 -0600 cpu_usage: {"cpu_p":1.75,"user_p":1.25,"system_p":0.5,"cpu0.p_cpu":3.0,"cpu0.p_user":3.0,"cpu0.p_system":0.0,"cpu1.p_cpu":2.0,"cpu1.p_user":2.0,"cpu1.p_system":0.0,"cpu2.p_cpu":0.0,"cpu2.p_user":0.0,"cpu2.p_system":0.0,"cpu3.p_cpu":1.0,"cpu3.p_user":0.0,"cpu3.p_system":1.0}
2017-03-23 13:34:44 -0600 cpu_usage: {"cpu_p":5.0,"user_p":3.25,"system_p":1.75,"cpu0.p_cpu":4.0,"cpu0.p_user":2.0,"cpu0.p_system":2.0,"cpu1.p_cpu":8.0,"cpu1.p_user":5.0,"cpu1.p_system":3.0,"cpu2.p_cpu":4.0,"cpu2.p_user":3.0,"cpu2.p_system":1.0,"cpu3.p_cpu":4.0,"cpu3.p_user":2.0,"cpu3.p_system":2.0}

Last updated 1 year ago