UDP

The udp input plugin allows to retrieve structured JSON or raw messages over a UDP network interface (UDP port).

Configuration Parameters

The plugin supports the following configuration parameters:

Key	Description	Default
Listen	Listener network interface.	0.0.0.0
Port	UDP port where listening for connections	5170
Buffer_Size	Specify the maximum buffer size in KB to receive a JSON message. If not set, the default size will be the value of Chunk_Size.
Chunk_Size	By default the buffer to store the incoming JSON messages, do not allocate the maximum memory allowed, instead it allocate memory when is required. The rounds of allocations are set by Chunk_Size in KB. If not set, Chunk_Size is equal to 32 (32KB).	32
Format	Specify the expected payload format. It support the options json and none. When using json, it expects JSON maps, when is set to none, it will split every record using the defined Separator (option below).	json
Separator	When the expected Format is set to none, Fluent Bit needs a separator string to split the records. By default it uses the breakline character (LF or 0x10).
Source_Address_Key	Specify the key where the source address will be injected.

Getting Started

In order to receive JSON messages over UDP, you can run the plugin from the command line or through the configuration file:

Command Line

From the command line you can let Fluent Bit listen for JSON messages with the following options:

$ fluent-bit -i udp -o stdout

By default the service will listen an all interfaces (0.0.0.0) through UDP port 5170, optionally you can change this directly, e.g:

$ fluent-bit -i udp -pport=9090 -o stdout

In the example the JSON messages will only arrive through network interface under 192.168.3.2 address and UDP Port 9090.

Configuration File

In your main configuration file append the following Input & Output sections:

[INPUT]
    Name        udp
    Listen      0.0.0.0
    Port        5170
    Chunk_Size  32
    Buffer_Size 64
    Format      json

[OUTPUT]
    Name        stdout
    Match       *

Testing

Once Fluent Bit is running, you can send some messages using the netcat:

$ echo '{"key 1": 123456789, "key 2": "abcdefg"}' | nc -u 127.0.0.1 5170

In Fluent Bit we should see the following output:

$ bin/fluent-bit -i udp -o stdout -f 1
Fluent Bit v2.x.x
* Copyright (C) 2015-2022 The Fluent Bit Authors
* Fluent Bit is a CNCF sub-project under the umbrella of Fluentd
* https://fluentbit.io

[2023/07/21 13:01:03] [ info] [fluent bit] version=2.1.7, commit=2474ccc759, pid=9677
[2023/07/21 13:01:03] [ info] [storage] ver=1.2.0, type=memory, sync=normal, checksum=off, max_chunks_up=128
[2023/07/21 13:01:03] [ info] [cmetrics] version=0.6.3
[2023/07/21 13:01:03] [ info] [ctraces ] version=0.3.1
[2023/07/21 13:01:03] [ info] [input:udp:udp.0] initializing
[2023/07/21 13:01:03] [ info] [input:udp:udp.0] storage_strategy='memory' (memory only)
[2023/07/21 13:01:03] [ info] [output:stdout:stdout.0] worker #0 started
[2023/07/21 13:01:03] [ info] [sp] stream processor started
[0] udp.0: [[1689912069.078189000, {}], {"key 1"=>123456789, "key 2"=>"abcdefg"}]

Performance Considerations

When receiving payloads in JSON format, there are high performance penalties. Parsing JSON is a very expensive task so you could expect your CPU usage increase under high load environments.

To get faster data ingestion, consider to use the option Format none to avoid JSON parsing if not needed.